SnippetMaster Support Forums
Return to main website
 
September 29, 2010, 12:27:05 AM
* Show unread posts since last visit.
* Show new replies to your posts.
Welcome, Guest. Please login or register.
Did you miss your activation email?
September 29, 2010, 12:27:05 AM

Login with username, password and session length
Search:  
Advanced search
* Home Help Search Login Register
SnippetMaster Support Forums  |  General  |  General Discussion & Support  |  Topic: Appears to work, but doesn't... « previous next »
Pages: [1] Print
Author Topic: Appears to work, but doesn't...  (Read 1914 times)
ljeff20

Posts: 2


[-] Appears to work, but doesn't...
« on: August 06, 2003, 03:15:05 PM »

Ok. Here's my problem. I can log into SnippetMaster, it lists the page I want to be able to modify in the drop down menu, BUT when I select it I get no options for editing. Just a black area with "Please select a directory or file from the drop down menus above."

If you need more info to diagnose my problem, let me know.
Report to moderator   Logged
admin
Forum Administrator
*
Posts: 2872

SnippetMaster Author


WWW
[-] Appears to work, but doesn't...
« Reply #1 on: August 06, 2003, 05:17:42 PM »

Can you private msg me with your config.inc.php file contents?

 Very Happy
Report to moderator   Logged
ljeff20

Posts: 2


[-] Appears to work, but doesn't...
« Reply #2 on: August 06, 2003, 09:35:55 PM »

Done
Report to moderator   Logged
lalala

Posts: 3


[-] idem
« Reply #3 on: August 14, 2003, 01:00:53 PM »

I got that same problem... any idea about what what provokes that?
Report to moderator   Logged
admin
Forum Administrator
*
Posts: 2872

SnippetMaster Author


WWW
[-] Appears to work, but doesn't...
« Reply #4 on: August 14, 2003, 04:51:40 PM »

I can't remember.. send me your config.inc.php file and I'll take a look.

Cheers!   Very Happy
Report to moderator   Logged
bluedigitalmedia

Posts: 4


[-] Running into the same problems
« Reply #5 on: August 28, 2003, 02:22:40 PM »

I am seeing the same issues as described in this thread and I'm not sure what to do.

I am testing on my LAN's web server right now and have to use the static ip address + directory to access the site I am developing -  192.168.0.1/mydirectory.

I cannot traverse my directory structure even though I have set my config parameters according to the phpinfo.php page I ran.

Just to make sure, I uploaded the same script with the necessary changes to a site I have live.  I created a test page with the snippet tags and was able to modify the page no problem so I know it has to do with my particular set up on my dev server.

Anyone else run into a similar issue and if so, have you found a solution for it?

TIA,

Cliff
Report to moderator   Logged
Jeanne

Posts: 7


[-] Same problem
« Reply #6 on: September 04, 2003, 07:08:41 AM »

I appear to have the same problem. I can see the directories in the pulldown menu but when selected I get nothing. Only one page with the snippet tags shows up in the "page" menu and I just have the black screen.
Report to moderator   Logged
uwmbjn

Posts: 1


[-] Appears to work, but doesn't...
« Reply #7 on: October 14, 2003, 12:14:54 PM »

I also have the exact same problem.  Does anybody have a fix for this?

I also can not get my login to work unless i disable it.
Report to moderator   Logged
ljweb

Posts: 1


[-] Appears to work, but doesn't...
« Reply #8 on: December 28, 2003, 05:55:57 PM »

My fix for this problem is to turn off norton internet security or any other similar programs, works fine with them off. Probably a cookie thing.
Report to moderator   Logged
kxkraze

Posts: 4


[-] snippermaster just refreshes... doesn't load page
« Reply #9 on: March 11, 2004, 10:35:36 AM »

I had this same problem and I have seen tons of questions asking what might be causing this.  I found one (if not the) solution:

The problem is that your server does not meet one of the snippermaster requirements... register_globals must be turned on for PHP4 support.

Fortunately, there is an easy fix.  If you put the following additional line in your .htaccess file  "php_value register_globals 1"  (without the quotes of course) then there is a good chance your problem will be fixed.

If you are wondering if register_globals is on or not, run the phpinfo.php file in the includes directory.

Hope this helps someone else.
Report to moderator   Logged
Pages: [1] Print 
SnippetMaster Support Forums  |  General  |  General Discussion & Support  |  Topic: Appears to work, but doesn't... « previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!